New Z915E ZTrak™ Zero-Turn Mower

Specifications

Compare >>> Select up to 2 models to compare specifications

John DeereZ915E ZTrak™ Zero-Turn Mower

Add Model --Please Select-- Z920M (Model year 2023) Z930M (Model year 2023) Z930R (Model year 2023) Z950M (Model year 2023) Z950R (Model year 2023) Z960M (Model year 2023) Z970R (Model year 2023)

Add Model --Please Select-- Z920M (Model year 2023) Z930M (Model year 2023) Z930R (Model year 2023) Z950M (Model year 2023) Z950R (Model year 2023) Z960M (Model year 2023) Z970R (Model year 2023)

Engine Manufacturer/model	CV742
Engine power	Gross at 3,600 rpm: 25 hp 18.6 kW
Fuel tank capacity	11.5 U.S. gal. 43.5 L
Mower deck size	48, 54, 60 in. 122, 137, 152 cm
Blade tip speed	Approximately 18,000 fpm
Transmission	Hydrostatic
Speed range	0-10 mph 0-16.1 km/h
Drive wheels	24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.)
Caster wheels	13x5-6
Warranty	36 months or 1200 hours, whichever comes first First 24 months, no hour limitation

Manufacturer/Model	CV742
Power	At 3,600 rpm, 25 hp 18.6 kW
Displacement	45.6 cu in. 747 cc
Cylinders	Two
Crankcase capacity	With filter, 2 U.S. qt 1.9 L
Oil filter	Full flow, replaceable
Lubrication	Full pressure
Cooling	Air
Air cleaner	Pre-cleaner Yes Heavy-duty canister type with safety element
Injection

Fuel type	Gasoline
Fuel consumption	Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr 4.2-7.2 L/hr
Fuel tank capacity	11.5 U.S. gal. 43.5 L
Fuel tank switch/shut-off valve	Yes

Charge system	15 amp
Battery voltage	12 V
Cold cranking amp	300 amp
Hour meter	Standard, digital
Operator presence starting system	Brake-N-Go (hand)

Transmission	Hydrostatic
Hydraulic pumps
Wheel motors	Tuff Torq heavy-duty integrated piston wheel motor
Travel speed	Speed range 0-10 mph 0-16.1 km/h Forward 0-10 mph 0-16.1 km/h Reverse 0-4.5 mph 0-7.2 km/h
Speed and direction control	Twin levers
Hydraulic capacity	5.9 U.S. qt 5.6 L
Hydraulic oil cooler
Filter	Internal, replaceable

Warranty	36 months or 1200 hours, whichever comes first First 24 months, no hour limitation

Drive wheels	24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.)
Rear tires
Load rating	4 PR

Dynamic braking	Twin levers
Park brake	Internal wet disk integrated in the transmission
Park brake actuation	Hand brake

Type	Electro-magnetic, 200 lb-ft 271 Nm
Drive	V-belt

Size	48, 54, 60 in. 122, 137, 152 cm
Deck construction	7-Iron PRO, one-piece stamped steel with reinforcements
Deck thickness	7 gauge 0.180 in. 4.6 mm
Discharge	Side
Height-of-cut range	Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm
Cutting width	48, 54, 60 in. 122, 137, 152 cm

Length	Varies by deck size
Thickness	0.25 in. 0.64 cm
Blade tip speed	Approximately 18,000 fpm
Number	Three

Caster wheel type	Pneumatic Front
Caster wheels	13x5-6
Front anti-scalp rollers	RH, center, LH
Rear anti-scalp rollers	Optional

Length	84 in. 213 cm
Width	With chute down, 62, 68, 74 in. 157, 173, 188 cm
Height	With ROPS up, 73 in. 185 cm With ROPS down, 47 in. 119 cm
Weight	1,100 to 1,178 lb 499 to 534 kg

Rollover protective structure (ROPS)	Yes
Slope operating limit	20 degrees (10 degrees with material collection system installed)

Date collected	1-Oct-2022